Electricians serving every city in Delaware · Open 24/7 for emergenciesCall (888) 592-6466
📞 (888) 592-6466
Home › Blog › Article

Level 2 EV Charger Installation at Home: A Delaware Guide

Planning EV charger installation? Compare Level 1 and Level 2, hardwired vs plug-in, Tesla Wall Connector options and whether your panel can handle it.

  • Open 24/7
  • Residential and commercial
  • Quote before work starts
  • Local to Delaware

Published 2026-10-27 by Flemings Electrical Service

The charging cable that comes with most electric vehicles plugs into a normal 120-volt outlet and adds only a few miles of range per hour. A Level 2 charger on a 240-volt circuit is several times faster, which is why most EV owners install one within months.

Hardwired or plug-in?

A plug-in charger uses a NEMA 14-50 receptacle on a 50 amp circuit and can come with you if you move. A hardwired charger, such as the Tesla Wall Connector on a 60 amp circuit, allows a higher charge rate and is the better choice outdoors.

Can your panel take it?

This is the question that decides the price. A 200 amp panel with spare capacity usually accepts a charger easily. A full 100 amp panel may need load management, a lower charge setting, or an electrical panel upgrade. A load calculation gives a definite answer.

Where to mount it

Think about where the charge port sits on the car and how you park. Chargers can go in the garage, on an exterior wall or on a pedestal by the driveway. Longer runs from the panel add cost, and outdoor runs need conduit and weather-rated equipment.

Protect the investment

A charger is a piece of electronics on a large circuit. Whole house surge protection at the panel is inexpensive insurance for it.

Getting it installed

Our EV charger installation service covers Tesla and all other makes, with popular requests coming from Hockessin, Lewes, Middletown and Wilmington.

More guides

Need an electrician?

Speak to a local electrician now. We answer day and night.

📞 (888) 592-6466
📞 Call 24/7: (888) 592-6466